Destin Pipeline Company, L.L.C.

Original Volume No. 1

 Contents / Previous / Next / Main Tariff Index

Effective Date: 09/01/1998, Docket: CP96-655-003, Status: Effective

Original Sheet No. 56 Original Sheet No. 56 : Effective

GENERAL TERMS AND CONDITIONS

(Continued)

5. MEASURING EQUIPMENT

5.1 COMPANY's Measuring Equipment

Orifice meter installation shall conform to the recommendations for

design and installation contained in A.G.A. Report #3 (API MPMS 14.3).

Turbine meter installations shall conform to the recommendations for

design and installation contained in Gas Measurement Committee Report

No. 7 of the American Gas Association. Other primary metering

devices, including but not limited to positive displacement and rotary

meter installations, shall conform to generally accepted engineering

practices in the industry.

5.2 Testing Measuring Equipment

COMPANY shall test its measuring equipment and temperature measuring

devices installed as provided in Sections 4.2(d) and (e), 4.3 and 5.1

hereinabove at such reasonable intervals as may be determined by

COMPANY. COMPANY will notify SHIPPER in time to permit SHIPPER to

witness such test if SHIPPER so elects. Measuring equipment shall be

subject to check tests and inspection by SHIPPER, on prior notice, at

reasonable times.

5.3 Correction of Measurement Errors

(a) Correction of Metering Errors. If COMPANY's measuring

equipment installed under Section 5.1 hereinabove or any other

equipment installed under Sections 4.2(d) and (e) and 4.3

hereinabove is found to be inoperative or inaccurate, such

equipment shall be adjusted to register correctly, and the

amount of inaccuracy shall be determined by the most accurate

method feasible. If the inaccuracy shall have resulted in an

error of more than 1% in the measurement of gas, then the

calculated deliveries of gas shall be adjusted to compensate