Crossroads Pipeline Company
First Revised Volume No. 1
Contents / Previous / Next / Main Tariff Index
Effective Date: 11/01/2001, Docket: RP02- 14-002, Status: Effective
Original Sheet No. 285 Original Sheet No. 285 : Effective
GENERAL TERMS AND CONDITIONS
(j) Other types of meters may be used if mutually agreed to by
Transporter and Shipper.
(k) Instrumentation and equipment to provide Records or samples
of gas necessary to determine the specific gravity, heating value, and/or
concentrations of nitrogen or carbon dioxide as required under Sections
26.6, 26.7 and 26.8 hereof may be installed at representative points along
the pipeline in lieu of installing such instrumentation and equipment at
each measuring station.
(l) Upon notice to Shippers, Transporter may prospectively
implement and use any future editions or versions of the American Gas
Association or ANSI reports referenced in this Section 26.
(m) Nothing in this Section 26.9 shall be construed to require
Transporter to construct any facilities.
26.10 Check Measuring Equipment.
(a) Shipper may install check measurement equipment, provided
such equipment does not interfere with the exercise of Transporter's rights
to operate its station under this Tariff.
(b) Transporter, in the presence of Shipper, shall have access to
Shipper's check measuring equipment at all reasonable times, but the
reading, calibration and adjustment thereof and the change of charts shall
be performed only by Shipper, unless otherwise agreed upon.
(c) Shipper shall exercise reasonable care in the installation,
maintenance and operation of its equipment so as to avoid any inaccuracy in
the determination of the quantity of gas delivered.
(d) The Records from such check measuring equipment shall remain
the property of Shipper, but upon request Shipper will submit to
Transporter its Records and charts, together with calculations therefrom,
for inspection, subject to return within 30 days after receipt thereof.