Dominion Transmission, Inc.

Third Revised Volume No. 1

 Contents / Previous / Next / Main Tariff Index

Effective Date: 03/01/2009, Docket: RP09-277-000, Status: Effective

Second Revised Sheet No. 1147 Second Revised Sheet No. 1147

Superseding: First Revised Sheet No. 1147

GENERAL TERMS AND CONDITIONS

Capacity Release

is Pipeline's currently-effective maximum rate for

service applicable to Releasing Customer, plus all

applicable surcharges and transition costs, excluding

any marketing fees. This maximum rate applies

notwithstanding any discounts granted under the Service

Agreement between Releasing Customer and Pipeline. The

posted notice must specify whether the Releasing

Customer will consider bids on a volumetric basis; if

so, the maximum applicable reservation rate shall be the

100% load factor derivative of applicable reservation

charges, as set forth on Sheet Nos. 32, 33, and 37 of

Pipeline's Tariff. The usage portion of the rate will

not be taken into consideration when determining the

"best bid." Unless Pipeline and Replacement Customer

subsequently negotiate different usage rate components

as permitted by the applicable Rate Schedule,

Replacement Customer shall pay the usage rates otherwise

applicable to Releasing Customer. Where Releasing

Customer is subject to a Negotiated Rate, the Recourse

Rate shall be used for purposes of bidding under this

Section 23.

a. Releases with an effective date on or after July

30, 2008 may exceed the maximum tariff rate for

the applicable service provided that the release

is for one year or less and the release takes

effect on or before one year from the date on

which the Pipeline is notified of the release.

8. Duration of the release, and any minimum acceptable

term, including the specific starting dates and times

and ending dates. Releases may commence at any time of

the month.

9. Whether the release is to be permanent or temporary.

Permanent releases are subject to pregranted abandonment,

as provided under 18 C.F.R. Section 284.221.

10. Criteria for evaluating bids, and for breaking ties

among equivalent bids. If no criteria are specified,

Pipelines default standards shall apply, as described

in Section 23.3., below.

11. Whether the release is firm and not subject to recall,

or subject to full day or partial-day recall on an

objective, not unduly discriminatory basis (by

Releasing Customer), and conditions under which any

recall right would be exercised, and any applicable

reput rights.

12. Whether the Releasing Customer has identified a Designated

Replacement Customer.