Dominion Transmission, Inc.

Third Revised Volume No. 1

Effective Date: 09/23/2000, Docket: RP00-555-000, Status: Effective

Original Sheet No. 1026 Original Sheet No. 1026 : Effective

GENERAL TERMS AND CONDITIONS

Measuring Equipment

4. MEASURING EQUIPMENT

4.1 Ownership and Operation.

A. Unless otherwise agreed, Pipeline shall install,

operate and maintain, the required measuring station

including all necessary appurtenances, at or near

Delivery Points. The quantity of gas delivered

hereunder shall be measured in accordance with the

published recommendations of the A.G.A. as amended or

superseded from time to time.

B. Where Customer and Pipeline so agree, Customer, at the

request of Pipeline, will change the charts on the

meters at Delivery Points, daily or so frequently as

required, and send them promptly by mail to Pipeline

without charge or cost to Pipeline.

C. Notwithstanding the foregoing Sections, Customer will

maintain and operate at its own expense displacement

meters of standard make and type, at all points where

gas is delivered to Customer in accordance with

contracts on file as effective rate schedules

immediately prior to September 1, 1949, or any

superseding contracts that provide for such

displacement meters, where said meters are also used

to measure gas sold by Customer to individual

consumers, notwithstanding inconsistent provisions of

Sections 3 and 4 of the General Terms and Conditions

of this Tariff.

D. Customer will furnish Pipeline, on or before the fifth

day of each month, an itemized written statement of

the quantities of gas delivered to Customer through

displacement meters during the regular monthly meter

reading period immediately preceding said date.

4.2 Check Measurement. Customer may install, maintain and

operate, at its own expense, such check measuring equipment

as desired, provided that such equipment shall be so

installed as not to interfere with the operation of

Pipeline's measuring equipment at or near the Delivery

Points.