Columbia Gas Transmission LLC

Third Revised Volume No. 1

 Contents / Previous / Next / Main Tariff Index

 

 

Effective Date: 12/01/2009, Docket: RP10-106-000, Status: Effective

First Revised Sheet No. 140 First Revised Sheet No. 140

Superseding: Original Sheet No. 140

 

AS RATE SCHEDULE

AGGREGATION SERVICE (Cont'd)

 

3. AGGREGATION AREAS AND AGGREGATION POINTS

 

(a) The Aggregation Areas under this Rate Schedule are shown on the map included as the last page

of this Rate Schedule. The Aggregation Points associated with those Aggregation Areas are as follows:

 

1. Kenova, Wayne County, WV

2. Flat Top, Mercer County, WV

3. Cobb, Kanawha County, WV

4. Alexander, Upshur County, WV

5. Delmont, Westmoreland County, PA

6. McClellandtown, Fayette County, PA

7. [Removed]

8. Crawford, Fairfield County, OH

9. York, Medina County, OH

10. Dungannon, Columbiana County, OH

11. Binghamton, Broome County, NY

 

(b) Transporter may from time to time change the Aggregation Areas and Aggregation Points to adjust

for changes in operations or to respond to market requirements by posting such change on Transporter's EBB.

 

4. OPERATING CONDITIONS

 

(a) For all receipt points for production, Shipper shall nominate quantities as follows:

 

(i) Shipper shall nominate quantities to be transported from the receipt points to the

Aggregation Point in accordance with the provisions of Section 6 (Nominating, Scheduling, and

Monitoring) of the General Terms and Conditions as modified by the procedure set forth below.

 

(ii) Shipper shall provide to Transporter through Transporter's EBB, at such times as may

be established by Transporter, the following information: the names of the shippers nominating gas

from Shipper's Aggregation Point; the transportation contracts held by those shippers, identified by

Transporters' contract number; the quantities nominated by each shipper; a supply reduction list for

such quantities; and such other data as Transporter may deem necessary to render service.

 

(b) For all receipt points for Appalachian production, the following procedures shall also apply:

 

(i) Shipper shall provide Transporter through Transporter's EBB a list of meters at which

service will be provided hereunder. Shipper and Transporter shall agree on the production to be

received by Transporter at each Appalachian receipt point. The quantities agreed upon for each

receipt point shall be used to allocate and confirm supplies. Shipper shall cause the operators of

such meters to submit written confirmations to Transporter.