Colorado Interstate Gas Company

First Revised Volume No. 1

 Contents / Previous / Next / Main Tariff Index

 

 

Effective Date: 06/01/2010, Docket: RP10-689-000, Status: Effective

Fourth Revised Sheet No. 377 Fourth Revised Sheet No. 377

Superseding: Third Revised Sheet No. 377

 

GENERAL TERMS AND CONDITIONS

(Continued)

 

13.8 (Continued)

 

(e) For Totem Storage Fuel and Unaccounted-For Gas, the percentage

shall be computed using twelve months of available data, as

normalized, related to Totem Storage activity and shall be applied

to Rate Schedules TSB-T, FS-T and IS-T.

 

(f) For purposes of Transporter's annual filing to be effective

October 1, 2008, the HP Transportation Fuel Gas retention

percentage, HP L & U and Other Fuel Gas retention percentage, HP

Incremental Gas Quality Fuel Gas retention percentage, HP Storage

Fuel Gas retention percentage, and Totem Storage Fuel and

Unaccounted-For Gas retention percentage shall be the percentages

as filed and approved in Docket Nos. CP07-207-000 and CP08-30-000.

 

(i) For purposes of Transporter's annual filing to be effective

October 1, 2009, the HP Transportation Fuel Gas retention

percentage, HP L & U and Other Fuel Gas retention percentage,

HP Incremental Gas Quality Fuel Gas retention percentage, and

HP Storage Fuel Gas retention percentage shall be computed

using all months of available data beginning from the in-

service date of the HP facilities and ending three months

prior to the proposed effective date. The Totem Storage Fuel

and Unaccounted-For Gas retention percentage shall be the

percentages filed and approved in Docket No. CP08-30-000.

Thereafter, the provisions of Section 13.8(a) through (d)

respectively shall apply.

 

(g) The calculation of the HP Transportation Fuel Gas retention

percentage, HP L & U and Other Fuel Gas retention percentage, HP

Incremental Gas Quality Fuel Gas retention percentage, Young

Storage Fuel Gas retention percentage, and Totem Storage Fuel and

Unaccounted-for Gas retention percentage shall each include a true

up feature. The true up feature will be implemented identical to

the methodology described in Section 13.5(a)(i) through (iii).