Black Marlin Pipeline Company

First Revised Volume No. 1

Effective Date: 11/01/1996, Docket: RP96-392-000, Status: Effective

First Revised Sheet No. 205 First Revised Sheet No. 205 : Effective

Superseding: Original Sheet No. 205

GENERAL TERMS AND CONDITIONS

(continued)

the right, in addition to all other remedies available to it by

law, to refuse to accept such deficient gas from Shipper until

such deficiency is remedied.

3. MEASURING EQUIPMENT

3.1 Installation: At each Point of Receipt or Delivery all measuring

equipment, devices and materials shall be furnished and installed,

owned, maintained and operated as mutually agreed by the parties;

provided, however, that Transporter may require, at its option, that

Shipper bear the expense of furnishing and installing such equipment

devices and materials in any instance in which such Shipper requests

a new or additional Point of Delivery or Receipt for such Shipper's

convenience. Shipper may install and operate check measuring

equipment at its expense provided such installation and operation

does not interfere with the use of Transporter's equipment.

3.2 Accessibility: Shipper shall provide or cause to be provided to

Transporter, free of charge, sufficient space on the platforms

designated as Points of Receipt on Appendix A for the Executed

Service Agreement for Transporter to install and access by helicopter

or boat its measurement facilities.

3.3 Testing Meter Equipment: The accuracy of Transporter's measuring

equipment shall be verified by test, at no more than forty-five (45)

day intervals and at other times upon request of the Shipper. No

less than 72 hours notice of the time and nature of the test shall be

given by Transporter to permit convenient arrangement for the

presence of Shipper's representative. If, after notice, the Shipper

fails to have a representative present, the results of the test shall

nevertheless be considered accurate until the next test. If any of

the measuring equipment is found to be registering inaccurately in

any percentage, it shall be adjusted at once to read as accurately as

possible. All tests of such