Kinder Morgan Illinois Pipeline LLC

Original Volume No. 1

Effective Date: 09/15/2008, Docket: <Filing Not found>, Status: Effective

First Revised Sheet No. 213 First Revised Sheet No. 213

Superseding: Original Sheet No. 213

GENERAL TERMS AND CONDITIONS

----------------------------

(g) DUST, GUM AND SOLID MATTER

The gas shall be commercially free of dust, gum,

gum-forming constituents and other solid matter.

(h) HYDROCARBON DEWPOINT

(1) KMIP may, from time to time, as

operationally necessary, establish and post on the Informational

Postings portion of its Interactive Website an upper limit on the

dewpoint for receipts on its system to prevent hydrocarbon fallout,

consistent with Section 19.1(f) hereof. KMIP will include in such

posting the anticipated duration of the limitation. Points with an

actual flow of 100 Dth/d or less will be exempt from the limitation

in any such posting. KMIP will provide as much prior notice of any

such limitation as reasonably practicable and will attempt to

provide this prior notice in the posting at least ten (10) days

before the beginning of the month in which the limitation is to be

effective. If prior notice by posting at least ten (10) days before

the beginning of the month is not practicable, KMIP will explain the

reason in the posting why it was unable to give such prior notice.

(2) Notwithstanding the foregoing, KMIP may not

decline to accept gas based on its dewpoint if the dewpoint of that

gas is equal to or less than fifteen degrees Fahrenheit (15 F). In

addition, KMIP shall continuously post "safe harbor" dewpoint values

based on operational and engineering considerations and shall make

any changes in these "safe harbor" values effective no sooner than

30 days after the revised "safe harbor" values have been posted.

KMIP may not decline to accept gas which conforms to such posted

"safe harbor" values if the gas meets the other quality standards

set out in this Section 19. No such posting may set out a dewpoint

"safe harbor" of less than fifteen degrees Fahrenheit (15 F).

(3) Where any posting of a limitation under

Section 19.1(h)(1) includes a dewpoint limitation, KMIP will

calculate the dewpoint at any point of receipt into KMIP's system

affected by the posting on request of the operator of that point or

any producer, purchaser, supply aggregator or Shipper with gas being

tendered at that point.