Keyspan LNG, LP (Alng)
Third Revised Volume No. 1
Contents / Previous / Next / Main Tariff Index
Effective Date: 01/27/2003, Docket: RP03-241-000, Status: Effective
Original Sheet No. 46 Original Sheet No. 46 : Effective
Joseph A. Vaszily, Vice President
GENERAL TERMS AND CONDITIONS
7. BALANCING RECEIPTS AND DELIVERIES (continued)
7.2 Estimates and Balancing. Estimates of fuel gas, boil-off gas, and
unaccounted-for gas may be utilized by KLNG to establish
Customer's LNG available for delivery at any time, but final
determination shall be made as soon as practicable, and departures
of estimates of such quantities from such finally determined
quantities shall be balanced out as soon as practicable. The
cutoff for fuel gas and boil off gas for final determination for
the closing of measurement is 5 days after the business month.
8.1 Unit of Measurement. The unit of measurement for the purposes of
this tariff shall be Dth. All quantities of LNG measured, whether
in the gaseous phase or the liquid phase, shall be reduced to
terms of Dth.
8.2 LNG Deliveries in Gaseous Phase. LNG deliveries in the gaseous
phase shall be first measured in Mcf and then converted to Dth by
determining the Total Heating Value per cubic foot as delivered,
multiplying such Total Heating Value by the number of cubic feet
delivered, and dividing by one million.
(a) The unit of volume for the purpose of measuring LNG in the
gaseous phase shall be one cubic foot of gas at a temperature
of 60 degrees Fahrenheit and an absolute pressure of 14.73
pounds per square inch, and dry.
(b) The volume of gas shall be determined in accordance with, but
not limited to, the published recommendations of the American
Gas Association and the American National Standards Institute
as KLNG deems to be in accordance with accepted industry
(c) The atmospheric pressure shall be assumed to be 14.4 pounds
per square inch, irrespective of actual elevation or location
of the point of measurement above sea level, or variations in
such atmospheric pressure.