Algonquin Gas Transmission, LLC

Fifth Revised Volume No. 1

Effective Date: 07/01/2004, Docket: RP04-361-000, Status: Effective

Original Sheet No. 524 Original Sheet No. 524 : Effective

GENERAL TERMS AND CONDITIONS

(continued)

5. MEASUREMENT (continued)

accordance with accepted industry practice. The amount of nitrogen and carbon

dioxide contained in the gas shall be determined at a time interval not exceeding

three months for the purpose of determining the deviation factors.

6. MEASURING EQUIPMENT

6.1 Measuring Stations.

(a) At each Point of Receipt, Customer shall cause the operator of the connecting

facilities to install, maintain, and operate, at that party's expense, a measuring

station properly equipped with measuring equipment which shall consist of the

necessary metering devices, designed and installed in accordance with, but not

limited to, the published recommendations of the American Gas Association and the

American National Standards Institute as Algonquin deems to be in accordance with

accepted industry practice.

(b) At each Point of Delivery, Algonquin will install, maintain, and operate a

measuring station properly equipped with measuring equipment which shall consist

of the necessary metering devices, designed and installed in accordance with, but

not limited to, the published recommendations of the American Gas Association and

the American National Standards Institute as Algonquin deems to be in accordance

with accepted industry practice. Customer shall reimburse Algonquin for all

expenses incurred by Algonquin in connection with the design and construction of

such measuring station, together with all associated piping and equipment.