Nautilus Pipeline Company, LLC

Original Volume No. 1

Effective Date: 04/05/2010, Docket: RP10-475-000, Status: Effective

First Revised Sheet No. 98 First Revised Sheet No. 98

Superseding: Substitute Original Sheet No. 98

GENERAL TERMS AND CONDITIONS

5. MEASUREMENT & MEASUREMENT EQUIPMENT con't

(b) Turbine meter installation shall conform to the

recommendations for design and installation contained in

Natural Gas Measurement Committee Report No. 7 of the AGA,

as published in 1981 and as such report may be further

revised.

generally accepted engineering practices in the industry.

5.3 Access to Equipment and Records

Transporter and Shipper shall have the right to be present at the

time of any installing, reading, cleaning, changing, repairing,

inspecting, testing, calibrating or adjusting done in connection

with the other's equipment used in measuring receipts and

deliveries hereunder. The records from such measurement equipment

shall remain the property of their owner, but upon request each

will submit to the other its records and charts, together with

calculations therefrom, for inspection and verification, subject

to return within thirty (30) Days after receipt thereof.

5.4 Check Measurement Equipment

Shipper may install, operate, and maintain, at its own expense,

such check measurement equipment as it shall desire, provided that

such equipment shall be so installed as not to interfere with the

operation of other, including Transporter's, measurement equipment

immediately upstream of the Point(s) of Receipt. Transporter

shall have access to such check measurement equipment at all

reasonable hours, but the reading, calibrating, and adjusting

thereof and the changing of charts shall be done only by Shipper.