Nautilus Pipeline Company, LLC

Original Volume No. 1

Effective Date: 12/01/1997, Docket: CP96-790-003, Status: Effective

Original Sheet No. 97 Original Sheet No. 97 : Effective

GENERAL TERMS AND CONDITIONS

5. MEASUREMENT & MEASUREMENT EQUIPMENT con't

5.2 Measurement Operations and Equipment

Measurement Operations shall include, but not be

limited to, the operation, calibration and testing of

transducers, chart records, meter runs, Natural Gas

quality monitoring devices, control valves and

responsibility for quantity calculations for the

measurement facility. Transporter may allow Shipper or

third parties the right to perform Measurement

Operations; provided however that such Shipper or third

party furnishes to Transporter all data required for

flow computations and can meet Transporter's

measurement and operating standards; provided, further,

each Shipper or third party which performs such

Measurement Operations shall be responsible for any and

all associated costs of such Measurement Operations

unless otherwise agreed to by Transporter and such

Shipper or third party. Measurement equipment shall

consist of the necessary metering devices, designed and

installed in accordance with the current published

recommendations of the American Gas Association or as

mutually agreed upon by Shipper and Transporter;

provided, however, Transporter shall have the right to

require and may install or cause to be installed

electronic Natural Gas measurement and control

equipment at all points.

(a) Where orifice measurement equipment is to be

used, orifice meter installation shall conform to

the recommendations for design and installation

contained in American Gas Association Report

No. 3, as revised September 1985, and as such

report may hereafter be further revised.